Jump to content

32FlatSix

IB Supporter
  • Posts

    38
  • Joined

  • Last visited

Reputation

2 Neutral

About 32FlatSix

Profile Information

  • Location
    Gloucestershire

Previous Fields

  • Current 911
    Carrera 3.2 1989
  • Daily Driver
    Audi A3
  • Lottery Car
    1973 2.8 RSR
  • Day Job?
    Automotive Engineer
  • Drive of your life
    Spa track day in 996 GT3RS

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Red one sold for £180k I believe. As an owner I also track the sales (saddo!), see below.
  2. Sounds like you've never driven or been in one.
  3. In case anyone is interested I've put the above on Ebay for sale. See https://www.ebay.co.uk/itm/303885268710 Chris
  4. Not a very inspiring review and he was wrong about the pricing new, Clubsports were cheaper than a standard 3.2, at least in the UK.
  5. https://www.ddk-online.com/phpBB2/viewtopic.php?f=5&t=62431 Chris
  6. As I suspected , no interest, so now binned!
  7. One pair Porsche Monoblock 4 pot (Boxster) callipers with EBC red stuff pads (6mm to back plate), retention clips and retention pins. Callipers probably need stripping and refinishing, but had full rebuild, new seals, bleed nipples and pipes prior to about 2 years of use. Part numbers 986 351 422 and 986 351 421, believed Boxster S rear 1999-2009 with 4 x 25mm pistons. £220 + postage.
  8. One pair of brake caliper adaptors to fit Porsche monoblock 4 pots to 3.2 Carrera (and maybe earlier) rear arms. Machined from Billet 6061-T6 aluminum and anodised, brand new, never fitted. From DWDesignwerks of USA, See http://www.dwdesignwerks.com/brakes.htm, includes M12 cap head bolts 4 x 80mm, 4 x 35mm. £220 + postage.
  9. Front A arm anti roll bar brackets ( and one bush). Removed years ago to fit through body style set-up. Any use to anyone before I bin them, perhaps for repair or a pattern? FOC plus postage .
  10. Weltmeister Adjustable Drop Links for through-body style Front anti roll Bar, well used, needs minimum 2 rose joints, a seized thread releasing and hex bar replating. See image for what it was like! NLA new. £15 plus postage. Chris
  11. Torsion bar / Spring Plate end caps now sold
  12. OK, I'll wait to hear from you, Chris
  13. Garage clear out, so the following parts are available, Postage to be paid additional on all parts or arrangements made to collect. 911 rear seat belt parcel shelf inertia (not handed) 911.803.049.07 new condition, used 1 year, includes buckle. £50. Photo to come One pair brand new boxed Bilstein front inserts for Boge dampers. Carrera 3.2 and earlier 911 types. Part number F4-P36-0115, Sport settings 222/103. £180 pair . Weltmeister A arm front mounts with double tie-down eyes. Includes all fixings and spacers. Need re powder coating £60 Torsion bar / Spring Plate end caps, powder coated with Weltmeister bushes, inner and outer, and fixings. Used approx. 10,000 miles, £60 Floor overmat set believed genuine Porsche, very little used ( and not by me), not sure which model they fit as Left side Passenger shape isn’t the same as my 3.2. £80 Overmat retention brackets for 911 , however not suited to above as there’s no corresponding press studs on the mats. £20. Rear bumper lhs rubber 911 505 099 047 0a but with hole for towing eye. Fitted about 8 years but finally changed as it was never correct for my MY. £25 Original Tyre pump, case hinge and click-locks are broken but the pump works fine. £75, compare to https://www.ebay.co.uk/itm/GENUINE-PORSCHE-911-TYRE-COMPRESSOR-/283567254121 Photo to come All for now, Chris
  14. Garage clearout. 911 Oil Pipe (suction hose) tank to engine (oil cooler), rubber, part number 930 107 233 00 or 02, not sure, genuine Porsche. Used but perfectly good condition. £15 plus postage.
×
×
  • Create New...