Jump to content

Recommended Posts

  • 2 weeks later...
  • 8 months later...

Yes indeed, there was an earlier thread on those, however I think they require the use of their own Eisenmann silencer, ie a 2in-1out Dansk is incompatible

Link to post
Share on other sites

Oops. Missed that.

But yes, with the Eisenmann you need to buy the entire system (and cannot combine with components from other exhaust manufacturers).

Out of curiosity, would the (bigger bore) Dansk/SSI work with the heating system of a Carrera 3.2 or would it need to be backdated?

Link to post
Share on other sites

I *think* SSIs mandate backdating heat on a 3.2, regardless of primary size, but it’s been several years since I fitted mine (and backdated heat)

Maybe someone else can confirm.

Link to post
Share on other sites

I think that the SSI/Dansk version weighs less, but the Eisenmann version works with the stock Carrera 3.2 heating system. Price is almost exactly the same. So if the SSI/Dansk also works with the stock heating system they would seem to be the obvious choice (at least for me)...

Edited by Teme
Link to post
Share on other sites

Eisenmann two-in silencers bolt up perfectly to SSIs so I don’t see why a Dansk silencer wouldn’t bolt up to the Eisenmann exchangers. They have the same size and position secondaries. 

Link to post
Share on other sites

I understand that the muffler that one used with the Eisenmann heat exchangers is different to the standalone muffler they sell.

 

 

 

Link to post
Share on other sites

I tried to link photos in the above post, but for some reason they are not showing. Hopefully they are on this post (the pics are from Pelicanparts). Anyway, to me it looks that the secondaries are not in the same position between the two. The one on top is the Eisenmann system.

F3F57D2F-5181-469F-871A-DC047BFDB6BB.jpeg

EDFBC56F-A9BD-4296-81EE-E962BF0D334C.jpeg

Edited by Teme
Link to post
Share on other sites
  • 2 years later...
3 hours ago, WP0ZZZ said:

I know this is an old thread but do you have any news on these?

If you have Instagram, just do a search for SSI and it comes up with their page.

Apparently prototypes have been produced now.

Regards

Russ

Link to post
Share on other sites
21 hours ago, Rustybum said:

If you have Instagram, just do a search for SSI and it comes up with their page.

Apparently prototypes have been produced now.

Aha! That must be where I had seen it recently. I didn't remember.

For those not on Instagram, this is from 22 January: "Hi guys. Hope you are all staying safe. We got the first 41mm prototypes send out for testing and we are working on new SSI projects, so stay tuned. We just want to show you a special tool we got from John back in the days. It’s an alignment tool for our big flange. Once in place in the jig to the last mm. Then they are hammered so the header tube expands in the flange - and trust us, it is stuck for good."

 

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...