MarkJ Posted March 15, 2019 Share Posted March 15, 2019 Anyone fitted one of these? Would it be worthy in the aid of more assured WOT ? http://www.rennline.com/Rennline-Aluminum-Throttle-Stop-Porsche/productinfo/F30/BLACK/ Until now, there has never been a source for a new throttle stop, which on many older 911's and 914's is battered from years of use. Rennline's new aluminum throttle stop mounts on both stock and Rennline floor boards, and comes with a new nylon adjuster bolt. Stainless hardware is included for attachment to Rennline floorboards. Link to comment Share on other sites More sharing options...
proporsche Posted March 15, 2019 Share Posted March 15, 2019 if you have a later 911 it is already there part of your pedal assembly....you can see the lip on the right side Unless you cut this off and use the one from ren...waist of time if you ask me;-) Ivan Link to comment Share on other sites More sharing options...
Phill Posted March 15, 2019 Share Posted March 15, 2019 Or just get an original for less than half the price. https://www.carpoint.de/anschlag-fur-gaspedal-911-912-914.html Link to comment Share on other sites More sharing options...
MarkJ Posted March 15, 2019 Author Share Posted March 15, 2019 ah, nice find Phill knew it was worth asking on here first. Link to comment Share on other sites More sharing options...
proporsche Posted March 15, 2019 Share Posted March 15, 2019 Mark can you explain what is VOT with this stop you are after....again you have to cut the lip from your pedal unless you have something else on your 911? IvaN Link to comment Share on other sites More sharing options...
MarkJ Posted March 18, 2019 Author Share Posted March 18, 2019 WOT not VOT 'wide open throttle' ie foot to the floor mine is an '86 car not later model so not sure if the loud pedal has that lip?. I was actually just browsing pedal boards when I came across it and wondered if it was some clever piece of engineering I was missing out on. The marketing blurb made sense that the original could be worn out (bit like my pedal board), hence the question on here. Link to comment Share on other sites More sharing options...
proporsche Posted March 18, 2019 Share Posted March 18, 2019 the lip on pedal is from i believe 1975 and up earlier models have rubber covered pedal without the lip Ivan Link to comment Share on other sites More sharing options...
ALEX P Posted March 19, 2019 Share Posted March 19, 2019 I was struggling to get WOT with my 993 throttle cable setup so I trimmed some off the back of the pedal. Mine is an '85 car Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now