Busybee Posted October 11, 2019 Share Posted October 11, 2019 Just now, David Gander said: Hi Haith, Yodel should be familiar with this address but put a note just in case not to use the post code in satnav, use the address instead (Craigneuk East Cottage or Craigneuk Road). My mob:- 07841514442 Regards, David Hi David, Many thanks. All booked in for Monday. I'll get that paid up later on today 👍 Cheers Haith Link to comment Share on other sites More sharing options...
David Gander Posted October 12, 2019 Author Share Posted October 12, 2019 Hi David, Managed to take a snap or two of the tea-tray spoiler. It’s in the original box and has a cardboard tube across the tips of the rubber to keep it spread. Looking for £350.00 plus delivery? Regards, David Link to comment Share on other sites More sharing options...
flatsix777 Posted October 13, 2019 Share Posted October 13, 2019 12 hours ago, David Gander said: Hi David, Managed to take a snap or two of the tea-tray spoiler. It’s in the original box and has a cardboard tube across the tips of the rubber to keep it spread. Looking for £350.00 plus delivery? Hi David, Thats fine, I’ll take it. Will PM you. Cheers David Link to comment Share on other sites More sharing options...
Busybee Posted October 17, 2019 Share Posted October 17, 2019 On 10/11/2019 at 1:45 PM, David Gander said: Hi Haith, Yodel should be familiar with this address but put a note just in case not to use the post code in satnav, use the address instead (Craigneuk East Cottage or Craigneuk Road). My mob:- 07841514442 Regards, David Tank arrived today David. Many thanks. Now trying to work out how best to protect it before installing it. Link to comment Share on other sites More sharing options...
David Gander Posted October 17, 2019 Author Share Posted October 17, 2019 Haith, Cannot remember who (possibly Lewis or Nige had a thread on stippling stone guard to resemble the original finish) after painting with with a good quality paint. Regards, David Link to comment Share on other sites More sharing options...
Busybee Posted October 17, 2019 Share Posted October 17, 2019 Thanks David. I’m sure I’ve seen a thread. Was thinking of giving the bottom half a good coat or two of rustoleum paint and then stippling on some underbody dinitrol. Might have been Andrew @fat fuchs that I saw doing it on the Targa maybe. Link to comment Share on other sites More sharing options...
Nige Posted October 17, 2019 Share Posted October 17, 2019 I stippled a grey epoxy onto the mine, did over a week or so adding layers each night. Link to comment Share on other sites More sharing options...
Busybee Posted October 17, 2019 Share Posted October 17, 2019 1 minute ago, Nige said: I stippled a grey epoxy onto the mine, did over a week or so adding layers each night. Thanks Nige. Any particular epoxy? Guessing the top half can stay factory fresh black as it’s in the frunk? Link to comment Share on other sites More sharing options...
Nige Posted October 17, 2019 Share Posted October 17, 2019 I used some left overs from 121 stuff from Rustbuster, but I guess anything just as durable will do. I use Jotun Jotamastic for any chassis type of stuff these days, you get more for your money and a wider range of colours. Link to comment Share on other sites More sharing options...
Busybee Posted October 17, 2019 Share Posted October 17, 2019 Just searched epoxy paint on flea bay and lots of floor paints came up. I have about 10l left from painting my garage floor. Is it the same thing I wonder? Link to comment Share on other sites More sharing options...
David Gander Posted October 17, 2019 Author Share Posted October 17, 2019 I wouldn’t think that floor paint was the same as it’s formulated for concrete not metal. Maybe it is? D Link to comment Share on other sites More sharing options...
Busybee Posted October 17, 2019 Share Posted October 17, 2019 1 minute ago, David Gander said: I wouldn’t think that floor paint was the same as it’s formulated for concrete not metal. Maybe it is? D Good point David. Guessing this is the stuff https://www.rust.co.uk/product/-em121-epoxy-rust-proofing-paint-light-grey--237 Link to comment Share on other sites More sharing options...
Nige Posted October 17, 2019 Share Posted October 17, 2019 Yes that's what I did mine with. Link to comment Share on other sites More sharing options...
SP72 Posted October 17, 2019 Share Posted October 17, 2019 Someone here mentioned that Vactan is the same product Rustbuster sell but at a cheaper price http://www.paco-systems.co.uk/vactan/ Lots on ebay Link to comment Share on other sites More sharing options...
Busybee Posted October 17, 2019 Share Posted October 17, 2019 Thanks chaps. That vactan site is full of products Shirish. No idea which is the one. Searched vactan on eBay but just a rust converter showing. Going to coat the thin factory paint in rustoleum in any case and then get some epoxy stuff to overcoat the base. Link to comment Share on other sites More sharing options...
SP72 Posted October 17, 2019 Share Posted October 17, 2019 3 minutes ago, Busybee said: Thanks chaps. That vactan site is full of products Shirish. No idea which is the one. Searched vactan on eBay but just a rust converter showing. Going to coat the thin factory paint in rustoleum in any case and then get some epoxy stuff to overcoat the base. Eh? There is only one Vactan link there (At least one my phone) - it’s rust treatment and primer for your top coat. Link to comment Share on other sites More sharing options...
Busybee Posted October 17, 2019 Share Posted October 17, 2019 16 minutes ago, SP72 said: Eh? There is only one Vactan link there (At least one my phone) - it’s rust treatment and primer for your top coat. Yup this one https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F122473698488. Tank is brand new so no rust to convert. Looking for a topcoat epoxy coating. The stippled on finish Link to comment Share on other sites More sharing options...
fat fuchs Posted October 18, 2019 Share Posted October 18, 2019 20 hours ago, Busybee said: Thanks David. I’m sure I’ve seen a thread. Was thinking of giving the bottom half a good coat or two of rustoleum paint and then stippling on some underbody dinitrol. Might have been Andrew @fat fuchs that I saw doing it on the Targa maybe. I used epoxy primer followed by 3M bodyguard through an appropriate spray gun Haith Link to comment Share on other sites More sharing options...
Recommended Posts