Jump to content

Headlight switch ?


Oli

Recommended Posts

On this 76 911 I am putting in a new turn signal indicator. I have dropped the headlight switch in order to make it easier to connect the wires from the new turn switch. When I pulled it from the back of the dash there are two wires I believe got disconnected. I have done nothing yet with the wiring as I want to go slowly and not get anything mismatched.
I would like to know if the wire, in the picture, with brass, L connector (white with black strip wire) and the short wire, (in the middle of the pic.) belong together and need to be connected to the bare pole on the switch?

 


 

20200504_113044.jpg

Link to comment
Share on other sites

Based on my SC wiring, I'm fairly confident that the white/black goes onto that terminal (it should be terminal 56) and there's nowhere else for the black/red to go other than onto the white/black.

Peter.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...