MarkT Posted July 9, 2020 Share Posted July 9, 2020 76 911 As I am going to put the rear bumper on today, I was checking the parts list and noticed the heat protection in the list (91150315701), I don't recall ever removing it and have nothing left over ! Were they fitted to all all 74-89 cars ? If anybody has a picture with it installed this would be very useful. Cheers Mark Link to comment Share on other sites More sharing options...
apesman Posted July 9, 2020 Share Posted July 9, 2020 Mine was missing but then again so was most things.. Still available fixed with speed nuts. Link to comment Share on other sites More sharing options...
MarkT Posted July 9, 2020 Author Share Posted July 9, 2020 On my car the fixing points are used to fix the lower rear panel ! As far as I am aware original. Pictures of car when I disassembled 4.5 years ago. Link to comment Share on other sites More sharing options...
MarkT Posted July 9, 2020 Author Share Posted July 9, 2020 Aha, one set of fixings for heat protection is above the bumper and a set of fixing for the rear panel below and fix to the bumper, so still need the heat protection panel and rubber sealing strip. Cheers Mark Link to comment Share on other sites More sharing options...
apesman Posted July 9, 2020 Share Posted July 9, 2020 Bit of a overkill, I sanded back the paint it comes with and resprayed using high temp paint. Link to comment Share on other sites More sharing options...
World Citizen Posted July 9, 2020 Share Posted July 9, 2020 A 'cheap' effective, super high-tec 🙄, heat reflective coating is Krylon High Heat Aluminium rattle can paint If you can't find it then any silver BBQ paint will do F1 Used and Approved 👍 Link to comment Share on other sites More sharing options...
MarkT Posted July 9, 2020 Author Share Posted July 9, 2020 It's already galvanised ! Link to comment Share on other sites More sharing options...
Dr Rock Posted July 9, 2020 Share Posted July 9, 2020 Make a shield out of stainless steel. Link to comment Share on other sites More sharing options...
SP72 Posted July 9, 2020 Share Posted July 9, 2020 Wrap it in gold protective foil from Demon tweeks or similar Link to comment Share on other sites More sharing options...
MarkT Posted July 9, 2020 Author Share Posted July 9, 2020 Left galv on and sprayed with Mark approved hightemp paint and fitted. Heat protection - Job done. Many thanks...... Next thing see next post. Mark Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now