Phill Posted September 5, 2020 Share Posted September 5, 2020 These are finalised. A direct replacement for the rubber trim piece, designed to replicate said piece as closely as possible. Fixes in place with M6 nuts an bolts (not supplied). These require a little sanding and a quick coat of satin black before I send them out so this increases the price a little. As always the profits go towards funding my son's Uni course. They take a while to print and prepare so there will be a delay if there are several orders. £55 inc. UK postage Link to comment Share on other sites More sharing options...
8bucksagallon Posted September 5, 2020 Share Posted September 5, 2020 Phill. what is the approximate size of the opening on the front? Link to comment Share on other sites More sharing options...
Phill Posted September 5, 2020 Author Share Posted September 5, 2020 38 minutes ago, 8bucksagallon said: Phill. what is the approximate size of the opening on the front? Front opening is 76mm x 55mm and the inside opening is 92mm x 55mm or 3" x 2 1/8" and 3 5/8" x 2" in American Link to comment Share on other sites More sharing options...
8bucksagallon Posted September 6, 2020 Share Posted September 6, 2020 Nah, its ok, I speak modern measurements!! Let me measure what I have, see if yours are any bigger. Link to comment Share on other sites More sharing options...
alastair Posted May 16, 2021 Share Posted May 16, 2021 Can I have one of these please? No rush. Send me your payment details when you get a minute. Thanks Alastair 1 Link to comment Share on other sites More sharing options...
Phill Posted May 16, 2021 Author Share Posted May 16, 2021 3 hours ago, alastair said: Can I have one of these please? No rush. Send me your payment details when you get a minute. Thanks Alastair You have PM. Link to comment Share on other sites More sharing options...
alastair Posted May 16, 2021 Share Posted May 16, 2021 Purchased 🙂 Link to comment Share on other sites More sharing options...
limalbeps Posted May 18, 2021 Share Posted May 18, 2021 I must have missed the post with the price...how much is this . Mike Link to comment Share on other sites More sharing options...
Phill Posted May 18, 2021 Author Share Posted May 18, 2021 6 minutes ago, limalbeps said: I must have missed the post with the price...how much is this . Mike The price is at the bottom of the first post. I don't have any left at the moment so if you are interested let me know. Link to comment Share on other sites More sharing options...
alastair Posted May 18, 2021 Share Posted May 18, 2021 Received today - nice simple piece of kit. Thanks Phill 1 Link to comment Share on other sites More sharing options...
Busybee Posted May 21, 2021 Share Posted May 21, 2021 Saw this and thought of you Phill. You could incorporate a grill in your printed design. Not sure if it’s necessary but I guess it could take a stone and stop it whacking your oil cooler. Link to comment Share on other sites More sharing options...
Phill Posted May 21, 2021 Author Share Posted May 21, 2021 14 minutes ago, Busybee said: Saw this and thought of you Phill. You could incorporate a grill in your printed design. Not sure if it’s necessary but I guess it could take a stone and stop it whacking your oil cooler. Thanks Haith, seen this before. It would be easy for the buyer to fit their own screen if they wished, either on the front where it's visible or on the inside opening where it wouldn't be. Link to comment Share on other sites More sharing options...
Busybee Posted May 21, 2021 Share Posted May 21, 2021 22 minutes ago, Phill said: Thanks Haith, seen this before. It would be easy for the buyer to fit their own screen if they wished, either on the front where it's visible or on the inside opening where it wouldn't be. Think it would look neater and be stronger printed into the design. Plus an opportunity for something design led and unique. Just a thought. I deffo need a 3D printer lol. Link to comment Share on other sites More sharing options...
Phill Posted May 21, 2021 Author Share Posted May 21, 2021 1 minute ago, Busybee said: printed into the design No chance, much too complicated and it would unlikely be strong. Link to comment Share on other sites More sharing options...
Busybee Posted May 21, 2021 Share Posted May 21, 2021 Well if you're not up to the challenge.... 😜 Link to comment Share on other sites More sharing options...
Phill Posted October 31, 2021 Author Share Posted October 31, 2021 Bump. I have two of these ready to go. I'm not planning to make any more due to lack of time (and inclination :-). ) Refer to the top of the thread for the description and ignore the last five posts. Link to comment Share on other sites More sharing options...
Darkstar32 Posted October 31, 2021 Share Posted October 31, 2021 are the two you have already sold? Link to comment Share on other sites More sharing options...
Phill Posted October 31, 2021 Author Share Posted October 31, 2021 34 minutes ago, Darkstar32 said: are the two you have already sold? No mate, I have two available 👍 Link to comment Share on other sites More sharing options...
Recommended Posts