Phill Posted January 22, 2021 Share Posted January 22, 2021 (edited) Does anyone have one of these knocking about? I would like to know the dimensions of the quadrant shaped toothed part. Ie is it an actual quadrant and would 4 make a circle (with a bit of trimming) and what would the diameter of the circle be? Or is the arc not a quadrant but "flattened"? If you have one please could you measure it for me? Thank you Oh, and the number of teeth and the height of them Edited January 22, 2021 by Phill Link to comment Share on other sites More sharing options...
ALEX P Posted January 23, 2021 Share Posted January 23, 2021 Don't know if it's just the photo Phil but it looks more than 90 degrees. I had a dig through my photo's and the ones I took off also kind of confirm this. The keep fit versions I replaced mine with are completely different. Link to comment Share on other sites More sharing options...
Phill Posted January 23, 2021 Author Share Posted January 23, 2021 Thanks Alex. I don't think they are going to meet my needs. I would need eight for my project as well, so a bit spendy. Better to get some cut that will fit my project. Back to the drawing board. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now