Jump to content

What else?


SurlySurdi

Recommended Posts

Ok, so, I've bought an oil tank for my G model 911. Question is, when it's installed what else do I need to change in terms of hoses, seals etc.? Part numbers would be great please chaps. Thanks.

Link to comment
Share on other sites

Provided all the pipes attached to it are good and you can get the connector at the bottom pipe undone then the only things I’d say would be a new level sender gasket. Matt has them for pennies. 

Link to comment
Share on other sites

Thanks Wingnonut duly noted. Do you have a link or part number by any chance please?

Ian the tanks already painted and the car had arch liners fitted during the body resto, good advice though, thanks. 

Link to comment
Share on other sites

https://type911shop.co.uk/epages/de867ca1-377e-432e-84fd-bdccf2206766.mobile/en_GB/?ObjectPath=/Shops/de867ca1-377e-432e-84fd-bdccf2206766/Products/2578&ViewAction=ViewProduct 
 

As Ian says it is worth giving it a coat of two pack epoxy to protect it. The powder coat can alway use some help. 

Link to comment
Share on other sites

21 minutes ago, Wingnonut said:

https://type911shop.co.uk/epages/de867ca1-377e-432e-84fd-bdccf2206766.mobile/en_GB/?ObjectPath=/Shops/de867ca1-377e-432e-84fd-bdccf2206766/Products/2578&ViewAction=ViewProduct 
 

As Ian says it is worth giving it a coat of two pack epoxy to protect it. The powder coat can alway use some help. 

Thanks will do and I'll get a new seal.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...