Mill911C3
-
Posts
102 -
Joined
-
Last visited
Everything posted by Mill911C3
-
Russet colour interior in a Lime Green Targa
Mill911C3 replied to Mill911C3's topic in Early Carrera
Thanks, I'll pass this on> -
I thought you Aussi guys mostly removed the Rr Bumperettes'> Happy Holidays!
-
Hello all. We have a member that asks: I have a 1974 Lime Green Targa which his 'Certificate of Authenticity' states was built having a 'Russet' leather interior. His interior was changed to Black w/sport seats+/-. He asks if anyone might have a picture of the Russet/Lime Green combination. Also is asking for some/any recommendations of a seat cover material source. Thanks, and have a good holiday season! Mill
-
YO, Thank you very much apesman>>!! Already have these ordered!! Mill
-
Never thought to try to. Bad part, the PET program doesn't even identify the part, so don't have a PN#. Anybody here have that?
-
Hello all. I am having my front bumper repainted. I've removed the headlamp washer nozzles finding 1(one) mounting gasket was spent< Asking if anyone has 1 laying around?
-
I saw a USA Face-Book post of a 1974 Impact Bumper venue. Asking its owner if this example is a Carrera, he replied 'no'. I ask the 'all knowing', were there 1974 Impact Bumper models that 'were not Carrera's? I have a picture but couldn't figure out how to load it+/-
-
Hello Oli. Good, Good Luck>> I actually contacted the dealer that first sold & maitained my C3+/- He was kind enough to respond & strike up corrispondence with me BUT told me that any mantenance records would have been on 'PAPER' & would have been tossed by now. SO, again, 'Good Luck'!
-
As always, "YOU GUYS ARE MY HEROS" >>>>>>>>>>
-
What process? Steam, put in my oven, use a torch?? That's exactly what I want to do !
-
Door Pocket Lids - PN#: 911555039/040. My lids have up to a 3/4"(19 mm) depression from end at mounting to center to other end at mounting. My pocket upper line is straight & not deformed. I searched this complete forum, not finding anyone asking how to straighten these lids. I could blame this on American drivers, BUT they usually hang their arm out the window, not rest it in the lid< Mine are in very good shape so my interest is to repair them. **See pic**. Thanks group & Merry Christmas to all !!
-
FYI, ordered issue 9 of Duck & Whale. The author told me it's completely a new article. I'll give you all my take when I get it>>
-
Anybody read the article of the same topic in 'Duck & Whale'?
-
After all this time I 'never found' what (or) if they sold for. I don't really care either, mine is worth the 'smile' !!
-
I saw one for sale somewhere maybe 5 months ago. I'm old, I don't remember where. Good luck >
-
Oli, I feel for you. I contacted the dealer who sold my car to a Dr. in Germany. Dealer told me, kindly, the same, that at that time in as the dealership, all records were "PAPER" and they just didn't see the reason to take up the 'file space'. SO, I got nothing too<<< I even tried my contact into Porsche Archives, told they were "to under-staffed & busy" to do that research. My #1 original owner has died as well. Well, we can dream (&) we own the cars !!!! If you figure a way, let us know.
-
Viewed, posting this information in the cars for sale heading, but reading the rules, one must own the car to post there. SO, while looking at the 'Flat Sixes web-site' they've listed all the Porsche models to be auctioned off. Shown as 'Lot 92' there, verbiage only, noting a 1977 911 Carrera 3.0 Targa with "Pre-Auction Estimate $115,000-$145,000". Also 'Lot 5034' writes, verbiage only, noting a 1977 911 Euro Carrera 3.0 with "No Pre-Auction Estimate. Watch for these>
-
Heated Windscreen Install
Mill911C3 replied to Jonny Hart's topic in Electrics including starting/charging
Gents, I just learned of the 'Heated Windscreen' (or) Windshield> I am in the throws of posting, what I've compiled so far of, option codes primarily for the Carrera 3.0 in my registry site. I have a member here in the states who has this 'Heated Windscreen' in his car. Was this a factory option & if so does anyone here know its code #? Thanks much>> -
Reassembling my CIS on my C3
Mill911C3 replied to Mill911C3's topic in Fuel System and Engine Intake Air
I'm good with that answer. I'll give it a go> Good tea? -
Hello Group>> Since I now have time & with this 70*f day, I finally started back reacquainting myself with the task ahead of me, reassembling the CIS back to my engine. I know the answer for my first question. Does the Intake Tube ID need cleaned for better performance, but how to is the open question? Since the Intake Tubes are off & the injectors are visible, I see rust<<. I have no knowledge if they'd ever been changed. So in my Intake Tube cleaning process, will the injectors be cleaned as well (or) should I just replace them. If I'm to replace them, are the requirements for our C3 different than those of a '1978' SC? I didn't see the injector nozzles called out in my PET program+/- Thank You Gentleman
-
Again, because I am not tech savvy I feel I need to start a new topic using the correct title. I hope I'm now offering information most of you have read.
-
WELL, with all my begging I've finally bitten the preverbal bullet & received the last copy available thru Ebay>>> As I start reading the article, I come to the realization the comparison is between the 74-75 "EURO Carrera" & our C3, not the RS. After I go to Staples to have the oversized pages reduced so as to post them, I will. 'BUT', during my read I see the words Recaro describing this units "optional seats". I ask the gods, is there some area of what seems to be the same seats displayed in the article as in my car, that I might find the Mfg'r. Name "Recaro"? To be continued>>
-
No, it's 1 page I was sent and it's out of the Total 911 Magazine. I believe I copied the page at the beginning of this quest.
-
Copper-Bronze & Cork, very nice colour combination>> Welcome!
-
A little behind fitting attachments into this forum, hope this works at least for my question. First thanks all for your inputs! Especially Alex, it's a joy reading your's! I was sent the above page from, I forget. He told me it was 1 sheet of the Total 911 article. I've searched for the magazine here in the states with '0' luck. Again, does any kind soul across the pond wanna send me a copy, or at lease photo copies of this, BUT, in colour please. AND, sorry for my delay in asking, I'm just too busy<<
