Ivelosttheplot Posted April 13 Share Posted April 13 Hi all Can anyone confirm oil quantity for 2.7s with engine oil cooler not external cooler believe 8 ltrs ? and oil pressures at 1000 rpm idle is 20 psi correct ? newly rebuilt engine regards Keith Link to comment Share on other sites More sharing options...
Ivelosttheplot Posted April 13 Author Share Posted April 13 Oil quantity I have just looked through my original service book and it says changing engine oil 911s add 10 ltrs and add more if necessary It does not state if this has a front or just engine oil cooler im assiming just engine cooler but the quantities seem high, mine just has engine oil cooler any assistance appreciated Keith Link to comment Share on other sites More sharing options...
Type911 Posted April 13 Share Posted April 13 With front cooler it can be up to 11 litres, no front cooler I would think 8 is about right, 1.0 bar per 1000rpm Link to comment Share on other sites More sharing options...
Ivelosttheplot Posted April 13 Author Share Posted April 13 Thanks mate i have about 8 now once the timing has been set up correctly I will run until warmed up then check and top up if required do you know the BTDC timing settings for a 1976 2.7s my book doesn’t say Regards keith Link to comment Share on other sites More sharing options...
Type911 Posted April 14 Share Posted April 14 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now