KnuckleHead
IB Supporter-
Posts
25 -
Joined
-
Last visited
Everything posted by KnuckleHead
-
Complete CIS injection system from 1980 3.0 SC
KnuckleHead replied to KnuckleHead's topic in IB Parts
Hi, The ports are 39mm The Fuel Head and WUR are both Bosch items with the following markings 0438100031 , which is the part No then an additional 16376 which is "stamped" into the label. The only markings I can see on the WUR are 090 as per pic also. Are there any other markings I should be looking for? -
Complete CIS injection system from 1980 3.0 SC
KnuckleHead replied to KnuckleHead's topic in IB Parts
Maybe I have the price wrong. I did post in the market place discussion without any responses. How about £800 ????? -
I am doing this a bit backwards as I have already posted this for sale, didn't realise this part of the forum existed. Amazing what you find when you read the "Rules for Selling Parts on IB - READ THIS" Anyway just after a bit of advice on what this system is really worth. I had a rough stab from eBay, but I may be way off. Thanks, Mick
-
Removed from a 1980 SC 3.0 Complete as per Pics including the ignition CDI unit. I have no real history as to what state this was in when removed. It came with the car that I bought which was already dismantled.. Its been sitting for at least 6 years that I know of, could be a lot more. I am going with a standalone ECU and hopefully throttle bodies, so this is not needed. Does still have the K&N filter as well ( as per the sticker on the airbox). Not really sure where to price this as the cheapest I can find on ebay is ~ £2K Want this gone so priced at £1000 if anyone any specific info or more pics please just ask.
-
PM sent
-
I am Interested in these, they have obviously been fitted to your car. Just some queries on them. Why have you swapped them out? Are the photos how they look now or before you fitted them?
-
Did this rear mounted oil cooler development progress to anything? I am virtually having to redo my entire system, however if this is a viable option, I would be interested.
-
Lots of IB parts and some non IB parts for sale
KnuckleHead replied to Silver911SC's topic in IB Parts
I will take the flywheel please -
HI David, If Darkstar32 does not take these. I will take the other 2 seals that flat6 does not want. £20 + postage? Mick
-
Removed from a 1980 SC, looking at the condition they all appear to be in original condition. I would class them all as in Very good condition. The front seats only have the slightest bit of wear on the piping to the drivers seat. See pics Unfortunately I do not have either the rear seat squabs or the front door cards to make the complete set. Also the centre console has the obligatory screw holes for mounting the 1980 Car phone Rather than ramble on about condition I've uploaded lots of photos. Looking for £1800 for the lot ( I don't want to split at this stage )
-
Jevvy, Sorry new to IB. Yep mark them as sold. Mick
-
Message sent regarding the parts I'm interested in Mick
-
Whale tail spoiler Original White Genuine Spoiler removed from a 1980 SC A few minor marks on the white solid section, however the black rubber section is in very good condition. £120 Collected from Newbury RG14 I also have the engine lid which has a small ding where I dropped it for an extra £20
-
Hi David, Can you please respond to my messages regarding collection of these tie rods. Mick
-
David, If they are still available I will be interested in the rods and other set of boots please Mick
-
Your seats are interesting as they are the only ones that I have seen with the headrests Pascha as well. Maybe there was some option when ordering where you could select Bolsters / Headrests. Do you believe yours are original or been recovered ? With mine I have virtually no history so I don't know.
-
Thats my Problem, The car was originally white , which sort of suits the Tan / Brown Pascha. However its been resprayed a very light silver colour. Which it definitely does not suit. So depending on the Originality / How much are they worth . I'm either going to get them recovered or sell them and get something else.
-
-
I'm just about to start work on my 1980 SC project Coupe and trying to sort out all my parts. These are the seats that came with the car and although it originally had the Pascha Interior, I'm trying to work out whether these seats have been recovered. I've been searching and cannot find any other Sport seat ( or comfort seat ) that has the Pascha on the bolsters as well. So Question I have is , is it possible these are original seat covers or have they been recovered by someone fascinated with the Pascha !
Gatherings organised via IB
Anyone attending a meet or event organised via ImpactBumpers.com does so at their own risk. ImpactBumpers.com is not responsible in any way for damage or personal injury sustained while attending any such gatherings. Please behave responsibly.
IB & Mighty Motor Media
ImpactBumpers.com is part of Mighty Motor Media Limited: UK company 07983578. The Impact Bumpers name and all logos are ©Mighty Motor Media Ltd. We have no connection to DR. ING. H.C. F. PORSCHE AG or any of its subsidiaries.
Respect Creative Copyright
We do not endorse the sharing of copyrighted images. Individual users are responsible for all content they post. It is impossible for admin to check every upload but we will remove disputed images swiftly to support copyright holders. Contact us anytime.
Classic and Specialist Car Valuations
My work as an independent car valuation specialist supports the IB forum! Please share my valuation websites with those needing assistance.